When choosing a fiber laser cutting machine, it is important to check the cutting precision, which can generally be controlled between 0.1 millimeters and 0.2 millimeters. In the process of actual incision, the smoothness of the incision surface is also important. It is necessary to check whether there are any burrs on the incision surface. Generally speaking, there will be some burrs to some extent, which are basically determined by the thickness of the incision or the gas used. There are no burrs below three millimeters. Nitrogen gas is better, followed by oxygen gas. If there is air inside, then this effect is also poor.

In the entire selection process of fiber laser cutting machines, there are certain selection criteria. When selecting this type of equipment, it is necessary to confirm the production scale and select based on processing data or cutting thickness. Only in this way can the quantity of equipment to be purchased or the relevant machine type be confirmed, providing relevant background for subsequent procurement work. The professional fiber laser cutting machine has relatively few burrs, and it can even be said that there are no burrs, and the cut surface is very smooth. Most manufacturers have their own power requirements for laser cutting machines and other equipment. From the current situation, most factories also cut metal sheets below six millimeters and do not need to buy high-power cutting machines. Judging from the degree of deformation of the data, if a fiber laser cutting machine is used for cutting, the deformation effect of good equipment on the data is very small.

Article source: Leather cutting machinehttp://www.hslichuang.com/