The digital leather punching machine can punch holes in various materials with high accuracy and fast operation speed, so it is widely used in the processing industry. However, improper operation during use can cause certain safety hazards, so the country has stricter safety requirements for digital leather punching machines. Let's take a look at the safety requirements that digital leather punching machines should meet.

1. General safety requirements

The design and manufacturing of digital leather punching machines must comply with relevant regulations. The strength, stiffness, and stability of the main components should ensure that they meet the requirements for use, and no fracture or breakage should occur during their service life when used according to regulations. In addition, any components in the system must not loosen or fall off during operation, and good preventive measures must be taken for the fasteners used.

2. Safety requirements for transmission system

The flywheel of the digital leather punching machine should rotate smoothly, and the direction of rotation should have markings that meet the requirements. For some moving parts that are easily accessible to personnel, such as motor pulleys, belts, transmission shafts, transmission gears, flywheels, etc., corresponding safety protection devices should be installed. In addition, the hydraulic system should also have safety protection measures, which can play a good protective role when the hydraulic system suddenly loses pressure or is interrupted.

3. Control system security requirements

The control system plays an important role in the operation of digital leather punching machines, so it should have the function of single stroke and continuous stroke, and the clutch and brake should meet the specified requirements. The control device must be installed correctly and firmly, and the foot switch should be protected by safety covers on the upper and both sides. The foot switch should also be flexible and reliable, and the reset spring used must be a compression spring. If operated with a handle, there should be a device to prevent the handle from being accidentally affected and causing the punching and shearing machine to malfunction.

Safety is very important when using digital leather punching machines, but in addition to ensuring that they operate according to requirements, companies should also purchase equipment that meets relevant safety requirements. This can improve the safety guarantee during processing and production, and also better maintain the service life of punching machines, reducing equipment maintenance and update costs for companies.

The article comes from a digital leather punching machine:http://www.hslichuang.com/