When using a digital leather punching machine, as long as various parameters are set according to the requirements, the material can be automatically punched, improving efficiency and saving manpower. However, during the operation of the digital leather punching machine, its punch can generate high-speed motion and strong impact force, so in order to advance production, the following checks should be done before use.

1. Power circuit and voltage

Assuming that circuit malfunction can cause varying degrees of damage to the punching machine equipment, it is necessary to check the power circuit and voltage before operating the digital leather punching machine. Only when all circuit equipment is normal and the voltage meets the requirements, can the power be turned on to power on the digital leather punching machine for operation.

2. Composition system

There are several very important components in the digital leather punching machine equipment, namely the smooth system, hydraulic system, and compressed air system. The outstanding operation of the smooth system can reduce the wear of important transmission components in the equipment. Before the initial operation of the digital leather punching machine, the operator needs to carefully check these operating systems to ensure that the oil volume, oil pressure, and air pressure of the smooth oil and hydraulic oil meet the operating requirements.

3. Protect equipment

Due to the weak impact force generated by digital leather punching machines during operation, in order to ensure the operation of operators, digital leather punching machines are generally equipped with complete protective equipment. Therefore, before initial use, the protective equipment should also be checked. If the protective equipment is not working properly, it cannot be turned on and needs to be corrected. When starting the punching machine, the operator must also ensure that there are no other personnel or debris within the operating range of the machine tool.

Before using the digital leather punching machine, the operator checks the power circuit to protect the equipment from damage caused by abnormal currents, and also to avoid accidents caused by the operator. Checking the primary system components is to ensure smooth punching operations and reduce wear and damage to the equipment. So, before using the digital leather punching machine, it is necessary to conduct a comprehensive inspection.

Article source: Digital leather punching machinehttp://www.hslichuang.com/